Sandford Garage, Wrt - Revo Authorised Dealer

It now looks like Krissy’s full build has finally come to fruition with final mapping completed at Sitech this morning on the Syvecs ECU. Recently having a full turbo back 3.5” exhaust system built by Custom Craft in Elgin ready for final mapping! It hasn’t been plain sailing though but with final touches and mapping applied by Simon and Nik @ Sitech this is the result, 621@ the wheels.
Basic spec is a built engine, ported head, cam upgrade, tubular manifold with gtx35 with ...external gate and screamer, WRT fuel system, 3.5” turbo back exhaust, Airtec Stage 3 intercooler, sitech plenum, Syvecs S6 ecu, etc etc
We have a great working relationship with Sitech as they have also mapped the WRT race car on Syvecs management now for 2 seasons, 2 championship winning seasons 🙌🏾🤗
Very shortly we will be delivering another of our customers cars down for Syvecs and mapping also once we have finished the repair and maintenance work on his car bringing it up to a standard fit for Syvecs!
🤗
See More

Eddie dropped in to have a Resonated Miltek Cat-back exhaust fitted to his otherwise standard and well maintained Focus RS! A really nice addition without causing excess noise or discomfort!
🤗

Sean just collected his ST from us after we carried out a block mod using all Genuine Ford parts including water pump! A full set of Pro hoses coolant hoses after recently having a burst hose and he decided they should all be replaced! Then an Autospecialists inlet plenum and a Forge recirc valve both fitted!
Along the way we remedied a couple small issues from poor previous workmanship and advised on some remedial work to bring her up to full health!
... 🤗
See More

We already have this on the shelf ready for fitting to one of our own RS that runs a hybrid turbo and cams. Will be interesting to see the results! Moving to 3.5” made a huge difference to the WRT race car in terms of response and increased power using less boost! 🤗
#wrtuning #airtec

The new RV018 wheel from Revo is available in both Ford and VAG fitments, both available from us! 🤗 #onlyrevo #wrtuning

The WRT Golf’s though.....
👍 for the GTD
❤️ for the GTI Clubsport
... Watch this space...
See More

Standard WRTuning Saturday shot
🤗

Paul returned in his recently purchased Fiesta ST. We have already given it a once over and made a few advisories. Starting with maintenance a fresh set of spark plugs and air filter were fitted along with new rear axle bushes! Then an Airtec Short shift and lower torque mount were both fitted!
#wrtuning #airtec

We’ve had a couple no-shows today which was a little disappointing, but we did have Adam here for a Revo Stage 1, whilst another RS had its annual service next door!
#wrtuning #onlyrevo

Last night we had Alex return to us for annual servicing plus an Airtec Stage 3 intercooler and boost pipes to replace his Airtec Stage 1 intercooler! 🤗

We also had the diceman pop up for a wee “healthcheck”, spec chec and discussion on where to go with tuning his “go-van”, looking perhaps like a bit of a track toy in the making here!
🤗
#wrtuning #govan

We’ve had Robert up from West Lothian this weekend switching over to JWR/Autotech software, and then some with his Focus ST! Starting off future proofing the engine rebuilding it with K1/Wiseco combo and block mod shims along with an RS oil cooler! Then Adding Newman Stage 1 cams alongside an RS turbocharger, 550cc Bosch injectors and ST Stage 4 software! Along the way a couple small issues were either remedied or highlighted for future reference! Becoming a very popular upgr...ade this both on standard and forged internals proving to be very reliable!
🤗
#wrtuning
See More

Then we had Andrew in For Revo Stage 1 on his Focus RS along with a Revo sound suppressor!
#wrtuning #onlyrevo

Revo Wednesday starting off with Tom’s Fiesta ST for a Revo Stage 2 with SPS switch!
#wrtuning #onlyrevo

Tonight we had Craig's stunning RS in for a final touch, his Spec R crossover to match his other Spec R goodies Spec-R Alloy

Busy wee weekend here regardless of the fact we had 2 “no shows”!
Amongst numerous Service’s, “just bought health checks” (highlighting the failings in some selling dealers preparation standards) , resurrecting poorly maintained cars from the brink and Revo remaps, we think this was the star of the show!
Immaculate both on top and underneath 2010 Focus ST just laying the foundations for running bigger power! ... Starting with maintenance by replacing the timing belt kit, water pump and Aux belts all with Genuine Ford parts! Then to the other end replacing the clutch and flywheel with genuine Ford Focus RS flywheel and Clutch and new slave! Whilst in there also fitting a Quaife Diff with Timken bearings and new diff seals! We are looking forward to seeing her again for further upgrades in the near future!
🤗
#wrtuning #revo #savingcarslives
See More

Airtec Motorsport not hanging around with Mk8 Fiesta development! Both 1.0 and ST being immediately catered for with induction kits, both available from us, supplied and fitted!
Please message for more information!
🤗

Last night we had Possibly the best condition/low miles (34k) 12year old Focus ST we’ve ever seen in for a host of upgrades!
Genuine RS clutch kit, slave and diff seals ✅ Mongoose Downpipe with locking bolts ✅ KMS thunderstorm cat-back ✅... Airtec Stage 2 intercooler ✅ Autospecialists inlet plenum ✅ JWR/Autotech Stage 3 software ✅
We could not fault the car in any way while we were under it which is pretty difficult these days if you know your ST’s!
Looks brilliant on the Speedlines too!
🤗
#wrtuning
See More