Antech Hydraulics

B&C Gear and Vane Pumps. Interchangeable components with many of the leading manufacturers. Tel 01253 890037 https://mailchi.mp/28f449397939/4qcdivo6x 2

Do you remember the BorWin gamma project? We sure do! Go check out our Latest news page to find out more!
https://www.antech-hyd.co.uk/antech-hydra ulics-delivers-hy…/

Our shelves are STACKED with B&C pumps as well as much more! Here are some photos of a few of our great products. Come take a look at what else we have in stock! https://www.antech-hyd.co.uk/

Our hireable NTF filter trolley that is ready to leave to a UK customer for a week rental. Capable of cleaning hydraulic oil down to three micron rating at up to 5 litres per minute.

Settima Pumps from ANTECH - https://mailchi.mp/8e31c783e2ae/hydraulic pumps-from-antech

Come check out our latest news page! We recently designed Hydraulic Power Units for a Marine Foundations specialist, go check out the full article at the link below;
https://www.antech-hyd.co.uk/marine-found ations-project/

This power pack will be with a PLC circuit and a set of hydraulic cylinders in a furnace application used to provide 63 litres per minute of flow at up to 220 Bar. This huge piece of kit uses Fuchs 46M Red non-flammable fluid. It uses an 18kW power control on a Kawasaki pump with an electronical controller.

These are our NTF 6 Pack units, which are used to clean oil down to 3 micron. These units utilise a Settima screw pump, NTF manifolds, and filtration elements. Each with a custom frame and pipework. Every one of them thoroughly leak tested. All ready to plug and play.
Come look at our stock over at https://www.antech-hyd.co.uk/ Or call us at: +44 (0) 1253 888333

Using an 11kW Test Rig with a Kawasaki 45cc/rev for our HMB 030 client to test their new Staffa Motor with a new front cover and a full reseal.

Pressure testing a Staffa motor using our own 11kW test rig

Hello from Antech Hydraulics

Antech’s Hydraulics and LJM cylinders on the first UK build project for Might Machines LLC. Looking forward to more UK Vibro Piling masts coming together.

Two 0.37kW HPU's for operating a conveyor Brake. Pressure sensors, Accumulator, all piped and tested to a single 1/4" BSP connection for our customer. Nice job and many more to follow - it's an on-going order!

Custom Flushing and Test Rig for the Automotive Industry. Kawasaki Piston pump, UFI Inline Filtration, Descase Breathers and an NTF for fine cleaning of the oil. Also capable of 325 Bar for Pressure Testing. Two selectable reservoirs.

ANTECH are Authorised Distributors for Kawasaki and Staffa Hydraulic Components

12-off 24V DC Explosion proof HPU's nicely installed on their valves. Stainless Tanks, EExd motor, B&C 1.5 lpm gear pump, Swagelok pipework. Nice job.

Here at Antech, We manufacture and install most systems with full commissioning alongside staff training to achieve maximum results. Feel free to contact us on +44 (0) 1253 888333. https://bit.ly/2Pvdy4t #Services #Quality #SystemDesign #HydraulicComponents #Products #Pumps #Motors #Filtration #Hydraulics #Settima #Kawasaki #Staffa

Are you looking for the best quality of system design & hydraulic components for your business? We provide excellent service support to your company, contact us on +44 (0) 1253 888333 or E-mail us:info@antech-hyd.co.uk. https://bit.ly/2Pvdy4t #Services #Quality #SystemDesign #HydraulicComponents #Products #Pumps #Motors #Filtration #Hydraulics #Business #ExcellentService