Condensation2Clear

Don’t replace foggy sealed units repair them its easy!
Today condensation can easily be removed from failed double glazing with a DIY kit

Do your windows look anything like the pictures to the left? If YES our kits can remove the condensation and bring your view back to life!

The repair is guaranteed for 20 years, although in reality will last the lifetime of the unit. Scientifically the guarantee is guaranteed because after the repair the pressure equalised unit will react differently to it’s environment and will not become pressurised when heated by the sun.

Here lies the problem, after years of being pressurised by the sun, one day the seal on the unit will open and the dry air which creates the thermal barrier will be forced out of the unit. As the unit cools down it will breath in damp air, which will be absorbed by the desiccants that surround the unit. However, the unit will now open when heated and as it cools it will breath in more damp air, this is called “solar pumping”. Eventually, the desiccants will reach a point of saturation and the unit will then produce condensation.

Condensation2Clear solves this problem forever METHOD:

1. Using our templates drill two tiny holes in opposite corners of the unit with our 4mm diamond coated drills
2. Dry out the unit with chemicals and dissolving condensation pellets.
3. Plug both holes with tiny plugs. (Our plug has a 0. 5mm hole so the unit will never open again under pressure. The thermal barrier is also recreated as the unit now holds still dry air and will only expel a minute amount of air when heated.
Take a look at the video showing how the process works. Full DVD & written instructions accompany the kit. Please read our FAQ’s, if you still have a question just send us a message…