Flux Fabrication
Tuesday: 10:00 - 18:00
Wednesday: 10:00 - 18:00
Thursday: 10:00 - 18:00
Friday: 10:00 - 18:00
Saturday: 10:00 - 15:00
Sunday: -
About Flux Fabrication
Custom stainless & titanium exhausts, tubular manifolds, Race preparation & modification. CAD / CAM capabilities.
Flux Fabrication Description
Stainless exhausts, Custom manifolds and headers, Roll cages, Custom alloy tanks, Aluminium & steel repairs, CAD, CNC or Laser cut items.
Reviews
Volvo V70 T6 3.5" downpipe. These will be available with or without a 200 cell sports cat.
Something for the 4efte guys if your switching over to a COP ignition system, check out our billet distributor cap blanks. 👍 RRP £90. These will be available from our store.
Toyota JZX 110 back in with us this week for a custom stainless exhaust system. Full 3" turbo back with a titanium pie cut tip.
We also saw this car back in 2018 for custom pie cut charge pipes, braided lines & a wastegate discharge pipe. Real tidy car inside and out 👌😎
Volvo XC60 D5 in for a Custom stainless DPF back exhaust system. These inward flared tips give the car a slightly more aggressive look without straying to far away from the OE design.
Turbo back exhaust all finished up for this boosted Clio.
BMW 335i E92 back box delete pipes. Available in Stainless steel or light weight Titanium 👌
Here it is! Our bespoke 3" Ultra light weight titanium manifold back exhaust system. Developed for our K20 swapped ZX 16v.
Supporting two titanium silencers, this system will offer excellent noise suppression whilst remaining over 50% lighter than a stainless variant making it a excellent choice for Track focused vehicles.
TiStore - Nissan 3" Titanium decat pipes.
Suitable for many of the Skyline, Silvia and JDM models.
RRP £210.
Titanium centre section all finished up for the K20 ZX build. Just the rear section to go 😎👌
Titanium exhaust components from TiStore laid out ready for the K20 ZX ultra light weight exhaust system.
Honda Civic EP3 in with us for a Custom manifold back stainless system + replacement manifold Flexi to correct another shops handy work 👀
Mmmm carbon 🤤 Custom stainless system for this quad.
4 into 1 headers all finished up & fitted on the K20 ZX build. 🤙
Leaving our mark on this E38 740i... Custom X pipe stainless catback. 😎
Kents R26 performing well out at Cadwell Park on Tuesday. Great to see this car being used to its full potential!
Another busy Saturday here at the shop with a V70 in for 3” straight flange downpipe + some good progress on the headers for the K20 ZX.
Awesome Primera GT in for a bespoke manifold back stainless exhaust system. 👌
What a Guy.. this Guy knows how too Weld��
Welded my motorbike exhaust up very clean and quality weld will be going back in my car sometime next year thank you JMS
Top quality. Exactly what I wanted. 5*.
Top job, thanks!
Recently had a custom cat back exhaust made for my MK4 Clio GT by flux. Absolutely amazing work,the welding was perfect and it sounds even better than how i wanted it to. Would definitely recommend these guys! Top work
Made a full turbo back v banded exhaust system for my 850 t5. The quality of work is exceptional, sounds fantastic and to me the welding is a work of art. Would recommend to anyone.
Jack put together a custom 200 cell sports cat on my Powerflow 3 inch de-cat downpipe and then married that to 2 and a half inch Jetex cat back system. The power now comes in more smoothly and there's a lot more of it. Can't wait to get a stage 2 map from Shem now. Well done Jack at Flux Fabs, if any body needs exhaust work done, go and see Jack.
Had my BMW quad exhaust done.
Perfect job and quality!
Sounds amazing ���
Thanks again
Had a full exhaust system made by Flux and stage 2 remap by Shemtek on my A3 2.0 TDI and absolutely over the moon with it. Great work by these guys, would highly recommend �
Had a full 3" system made by jack, couldn't be happier with it! Awesome work as always
Fitted my rear box custom built and fitted straight pipe brilliant customer service 100% satisfaction ������
Fantastic job on welding in a new replacement sports cat on my Vectra SuperTouring to get it through its MoT
What a Guy.. this Guy knows how too Weld��
Welded my motorbike exhaust up very clean and quality weld will be going back in my car sometime next year thank you JMS
Top quality. Exactly what I wanted. 5*.
Top job, thanks!
Recently had a custom cat back exhaust made for my MK4 Clio GT by flux. Absolutely amazing work,the welding was perfect and it sounds even better than how i wanted it to. Would definitely recommend these guys! Top work
Made a full turbo back v banded exhaust system for my 850 t5. The quality of work is exceptional, sounds fantastic and to me the welding is a work of art. Would recommend to anyone.
Jack put together a custom 200 cell sports cat on my Powerflow 3 inch de-cat downpipe and then married that to 2 and a half inch Jetex cat back system. The power now comes in more smoothly and there's a lot more of it. Can't wait to get a stage 2 map from Shem now. Well done Jack at Flux Fabs, if any body needs exhaust work done, go and see Jack.
Had my BMW quad exhaust done.
Perfect job and quality!
Sounds amazing ���
Thanks again
Had a full exhaust system made by Flux and stage 2 remap by Shemtek on my A3 2.0 TDI and absolutely over the moon with it. Great work by these guys, would highly recommend �
Had a full 3" system made by jack, couldn't be happier with it! Awesome work as always
Fitted my rear box custom built and fitted straight pipe brilliant customer service 100% satisfaction ������
Fantastic job on welding in a new replacement sports cat on my Vectra SuperTouring to get it through its MoT
More about Flux Fabrication
Tuesday: 10:00 - 18:00
Wednesday: 10:00 - 18:00
Thursday: 10:00 - 18:00
Friday: 10:00 - 18:00
Saturday: 10:00 - 15:00
Sunday: -