About Psn Tuning
Sorry but dont answer any posts on this page, due to running our website - Check out our website at http://www. psntuning. co. uk /index. php
Reviews
Finally got a chance to fit one if these Tecnigas exhausts to a GTS300 fits gts250 as well , after the normal struggle of getting the old exhaust off (these come with a full down pipe in stainless not just a slip on can) found the new one quite an easy fit, road legal, only slighter louder than the standard and a lot lighter. Dyno graph show before and after,there was a slight gain on Bhp but no rollers had to be changed just a new belt which gave it a bit more gearing to hit the rev limiter at 82mph. So a nice light stainless and Ali full exhaust system that can just be bolted on. http://www.psntuning.co.uk/scooter_parts. php?prt_id=3702 If interested feel free to Mention FACEBOOKGTS300 in your order for a ┬Ż10 pounds discount. Retail is ┬Ż215.99
http://www.ebay.co.uk/itm/-/401374135705? Any good to a vespa super 8 inch owner
Jims engine finally done meant to be just over 30bhp ended up 35bhp whoops Its a 179 with no welding no machine work on barrel or head even reed valve not sunk in. Please ignore torque figure not set up for it as its an auto but this dyno drum is a very heavy 350 kilos not like on some of the small really light ones on some dynos which can be whipped up to speed quicker as they are easier to spin up. As always I show the dyno screen not just the back wheel going round and then say the peak power,you can see how long it holds on to the power as it changes the gearing and the revs varying just around 200 through the run until top of the gearing is hit.
Scud in the air
Some wheely good photos of our Auto race scooters over the mountain at Cadwell Park some with back wheels off as well
Another lamby auto sorted rebuilt to 179cc would only do 55mph now 18 hp already seen 80 on its clock on the road test .
https://www.youtube.com/watch?v=6FkAIcJu9 Ao
https://www.youtube.com/watch?v=86YWhNT-o tk
If anyone is after a scooter balloon for their party we have them on ebay but if you ring shop and pay by card youll get them ┬Ż1,50 cheaper still with free post http://www.ebay.co.uk/itm/-/401325978318Ō Ć”
Team Psn playing out at Mallory
Latest advert in Scootering Magazine
well done the psn race team for a great weekend of scooter racing and to Gary Peacock for getting to out right lap recorded set by the Italians when they came over last year.
Warning to you conversion boys and standard scomadis, this may be a one off but this engine mount is out of a 50cc and has already failed , could be a bad weld but be careful when converting this part it needs strengthening, don't worry Simon Ashmead we have put extra weld onto yours when we did it. The later cradle like on the 125 have an extra silent block on the side to help strengthen them from standard. With this in mind this scomadi conversion will be the first one (that I know of) that will have a full runner type cradle system in it with a proper cradle and silent block.So no vibration problems like some conversions I have seen.
Been dynoing a Scomadi 125 4 stroke this afternoon blue line is the scooter as it came in top is 8.4bhp and drops to 6.5 at 50mph fitted new sports variator set up rollers for this bike and red line is the result, no real gain in power but the variator holds on to the power better and has 7.5 at 50mph now and also has better over run as it must add a bit of gearing on . you can see on the second graph with the revs on the original variator start over revving at around 52mp...h and the sports variator around 57mph, I also gave it a bit more fuel via a trick i know as I dont have jets for these bikes and it run on better as well . If you are interested in this variator they will be on the website soon. Also this variator we have used is for sale only run for about 20mins in total and comes with the rollers I finished up with. ┬Ż85 pounds to first person to phone 01924445449 takes it , also includes post as well , We are only removing it as the 125 lump is coming out and a 2 stroke is going in this bike .
See More
What a great bunch of lads, no bull shit, just get on with it & produce BIG BHP...
Well recommended sorted my TS1 out on the dyno...
Well happy with my gilera great quality work, impressed with the lads down at Psn highly recommended!!
Top blokes, they know their stuff, total trust with my scoot.
They have done an amazing job on my Yamaha aerox love it
Thank you for your service all the way from Israel
Highly Recommend!, Great Service!, Quick Turnaround with Great Tuning knowledge! And considering this is a company the prices are very good! Thanks, see you again in the near future.
Everything these guys have done for me as always been brilliant! Quick service with parts and got my scoot running 25 bhp and reliable..
Brilliant service, kept me well informed what you were doing - Alan Broscombe
Needs some heating in the shop lol but apart from that its alright, he made sure he got everthing sorted from what i orderd ¤¢Æ
Very rude over the phone and can't fix a 4 stroke so no point in using these