Trailflex Golf

Trailflex olf uses recycled car tyres and stone bound with polyurethane resin to create one of the greenest paving solutions on the market today.

Trailflex can be laid extremely quickly using minimal equipment and is ready to use within approximately 16 hours, reducing disruption to the public.

It is a one part cold poured system. We advise you to consult a ground engineer to ascertain the type of the ground you are working with prior to installation. Terram may be required beneath the type 3 in the case of heavy clay in the existing ground.

This specification is based upon standard good practice and must be adapted by the client in line with local conditions to provide a stable porous sub base. It is the responsibility of the specifier to design a construction suitable for the expected traffic and ground conditions The resulting finish is dependent on the quality of the ground works.
Trailflex is suitable for use in public realm spaces reducing trips and falls and providing a pleasant surface on which to walk. Due to the shock absorbent qualities of the surfacing it can also reduce the risk of potential injury to joggers and walkers. We generally recommend a minimum of 50mm of type 3 aggregate for footpaths and 200mm for car parks or driveways. This specification provides a level surface which will remain free of standing water due to the highly porous nature of the product. Trailflex will accept up to 50, 000 litres of rainwater per square metre per hour.