Vw Golf Mk4 Upgrades And Spare Parts

Votex mk4 golf kit ... rather rare to find. This will be going on my pd150 daily driver.
Not for sale.

From left to right, Mapped 1.9 tdi pd130 (190bhp), mapped 1.8t harlequin (210bhp), mapped 1.9 tdi VE90 (155bhp), mapped 1.8t anni (215bhp+), mapped 1.9 tdi pd150 (195bhp)
One of them will be running 300bhp+ over 400 lb-ft torque by mid summer.

4mo valance been de-textured ready for paint, Anniversary valance almost ready for jazz blue paintjob

Custom made harlequin anniversary edition BBS centre cap spanner

Anni front valance with a previous bad sray job, all the old red paint on the surface needs sanding away due to flaking off.
I am color changing this once it prepped ... its going Jazz Blue
Just made a start sanding through the red to see what im up against .... a lot of sanding to do on this one before i can prime and think about paint.

Good upgrade here for mk4 golf .... Neuspeed 28mm rear Anti-roll bar. 3 way adjustable, best used on softest setting if used with standard front ARB. For stiffest setting you should run at least a 25mm front to match.
No use for it now so it is up for sale at £100

Up for sale are some golf mk4 anniversary BBS RC 18 inch alloys. They need a refurb to be mint as 3 of the wheel have light kurbing marks that can be sanded down before repaint. They are in very usable condition as they are already. £350 with no tyres or £425 with tyres 2 new uniroyal Rainsport 3's with 8mm tread and 2 falken sports tyre with 4mm tread left.

Stage 2 mapped ECU FOR SALE available was running 237bhp on this ko3s turbo 1.8t AUQ octavia vrs comes with SKC code so you can code it into your own car retaining immobilisor. Stage 2 ECU is £150 ovno

Time to de texture a pd150/v6 4mo front valance .... first plastic primer then around 5 coats of high build primer. Now has a thick layer of primer ready to wet flat nice and smooth ready for LC9Z black magicpearl paint.

Another car with upgardes for mk4 golfs ..... the mk1 skoda octavia vrs ... 1.8t 180bhp AUQ engine 312mm front 256mm rear brakes, this one is stage 2 tuned with Forge FMIC, Forge diverter valve, Carbonio air induction kit and performance exhaust system ... unknown who mapped it but its at a stage 2 tune running 237bhp.
Many parts will be available for sale allthough not everything, some parts i need for personal projects

GTI exclusive pd150 with Euro spec rear lights

US rear lights, they look rather well

Still not quite done, 1.8t harlequin anniversary

Forge motorsport FMIC for 1.8t AUQ Leon Cupra

Harlequin now with Lupo mirrors plus front/rear anniversary valances. It needs sideskirts now.

VW Lupo mirrors on mk4 golf bases. From silver to yellow for the harlequin anniversary 1.8t.