Airpac Bukom Oilfield Services

Some recent Load Outs from our Perth base for projects offshore Western Australia. A selection of High Pressure Air Compressors and a Steam Generator were mobilised in support of an LNG plant shutdown. A Zone II 1000 cfm (DNV 2.7-2) Air Compressor was also mobilised to be utilised on a maintenance project on-board an FPSO vessel. The equipment will be operated and maintained on both projects by our fully qualified and experienced Mechanic Operators. For more information on our product range and how we can support your next project, please visit our website: http://www.airpacbukom.com/

One of our 4.5 MMbtu Steam Generators supporting N2 Flow Testing at a customer's yard in Singapore. The Steam Generator is being operated and maintained onsite by one of our mechanic operators. For more information on our full range of Steam Generators, please visit our website: http://www.airpacbukom.com/rental-service s/steam-generators

Are you looking for a new opportunity? We are currently accepting CVs for a Procurement Assistant to join our Aberdeen team. This full-time role will be based in our Kintore head office. Please visit our website for further information and to apply for this role: http://www.airpacbukom.com/careers/1

A 4.5 MMbtu Steam Generator being loaded out of our Perth base to support a chemical cleaning project for an LNG facility in Western Australia. The unit will be supported by our fully experienced and qualified Mechanic Operators. For more information on our range of Steam Generators, available from 1.4 – 6.2 MMbtu, please visit our website: http://www.airpacbukom.com/rental-service s/steam-generators

A photo of six of our 1050 cfm Rigsafe Air Compressors in Malaysia. The equipment was utilised in support of well cleaning operations offshore of Sarawak. Our operators were on board the rig to operate and maintain the compressors and were commended by the customer for their co-operation and teamwork within the testing team. For more information on our range of air compressors, please visit our website: http://www.airpacbukom.com/rental-service s/air-compressors

A Steam Generator and Heat Exchanger leaving our Aberdeen base for a project in Qatar. The units will be joining a spread of our equipment already on site to support well testing activities. The 10K Heat Exchanger and 4.5MMbtu Steam Generator have just undergone a full 5 year recertification and will be supported on location by our team of skilled operators. For more information on our products, please visit our website: http://www.airpacbukom.com/rental-service s/1

Due to increased operations Airpac Bukom are currently looking for a Sand Filter Operator with immediate availability. This will be a temporary post to cover a project in the UK North Sea for a 3 week period. Please visit our website for more information and to submit your CV for consideration: http://www.airpacbukom.com/careers/1

Are you looking for a new opportunity? We are currently accepting CVs for an Operations Administrator to join our Aberdeen team. This full-time role will be based in our Kintore head office. Please visit our website for further information and to apply for this role: http://www.airpacbukom.com/careers/1

Something BIG is coming! We are continually expanding our high-pressure fleet and will be making an exciting announcement shortly, can you tell what it might be? Contact your local Airpac Bukom team to request more information: http://www.airpacbukom.com/contact/1

A photo of some of the equipment we recently supplied for a well P&A campaign on-board a semi-submersible drill rig, along with our rig cooling partner OPTIMA. Jointly bid and awarded under our alliance, we supplied a package to support flaring and rig cooling operations during an 18 month campaign in the North Sea. Rigsafe Air Compressors, Hydro-Boost Pumps, Dual Submersible Pumps, Booms, Manifolds, Nozzles and Hoses were all supplied, installed and operated by a cross-trained, joint team from Airpac Bukom and OPTIMA. For further information on our alliance partnership, please visit our website: http://www.airpacbukom.com/rental-service s/rig-cooling

One of our brand new fleet of 1550 cfm (35 bar) Air Compressors loading out from the Aberdeen office for an offshore project. The high pressure, 508 psi, combined with high flow, up to 1550 cfm, will be utilised to create a subsea air curtain. The two-stage unit will also be used to provide a separate low pressure air supply for winches, tuggers and tooling. For more information relating to this highly versatile product, please visit our website: http://www.airpacbukom.com/ne…/new-xrvs -1550-air-compressors

Our Air Compressors are available with outputs of as little as 70 cfm through to 2100 cfm and at pressure ratings from 100 psi to 508 psi. The range is available in a variety of configurations, with wheeled, skid, caged or containerised units available. Visit our website for more information and to find the perfect compressor for your next project: http://www.airpacbukom.com/rental-service s/air-compressors

Six of our 1050 cfm Air Compressors and an Air Manifold heading out from our Singapore base to a project offshore Sarawak, Malaysia. The units will be supported on site by two of our skilled operators. For more information on this product, please visit our website: http://www.airpacbukom.com/…/ingersoll- rand-xp1050scfm-125p…

Are you looking for a new opportunity? We are currently accepting CVs for an experienced Diesel Compressor Mechanic to join our Aberdeen team. This full-time role will be to maintain, service, repair and modify our range of equipment and will be based onshore in our Kintore workshop. Please visit our website for further information and to apply for this role: http://www.airpacbukom.com/careers/1

We are pleased to announce that we have recently expanded our high-pressure fleet to include new XRVS 1550 Air Compressors. The two-stage, variable pressure units, offer 43.9m³/min (1550 cfm) with delivered pressure of 25 bar (365 psi) or 38.23m³/min (1350 cfm) at 35 bar (508 psi). As standard, the XRVS compressors are trailer mounted, but they can be supplied in a DNV certified frame for use in offshore environments, making them suitable for a broad range of market applications. Visit our website for the full story: http://www.airpacbukom.com/ne…/new-xrvs -1550-air-compressors

Pictures of some recent load outs from our Perth base. One of our purpose built 370 cfm Rigsafe Air Compressors leaving for a Monopod Platform offshore Western Australia. A 1000 cfm Zone II compressor and dryer package was also loaded out for a separate project offshore Northwest of Western Australia. The package will be utilised to provide instrumentation air while the on board compressor system is being repaired. For more information on our capabilities, please visit our website: http://www.airpacbukom.com