Almond Aqueduct

The Almond Aqueduct, also known as the Lin's Mill Aqueduct, is a navigable aqueduct that carries the Union Canal over the River Almond in Scotland, west of Ratho, Edinburgh. HistoryThe aqueduct was built to a design by Hugh Baird, with advice from Thomas Telford, in tandem with the Slateford Aqueduct and Avon Aqueduct, with which it shares its design. Baird had originally proposed to have only a single span, with embankments carrying the canal the rest of the way, but eventually decided to use the same design as the other two aqueducts. Telford was not convinced that the stone arches were necessary in conjunction with the iron trough, but Baird used both on all three major aqueducts. Construction was carried out by Messrs. Craven, Whitaker and Nowell between 1819 and 1821, their success in building a stone bridge over the River Ouse making their tender for the contract "by far the most eligible. "DesignThe Barton Aqueduct of 1761, and subsequent canal aqueducts in the United Kingdom, used large quantities of masonry and puddling to obtain watertightness. After the success of The Iron Bridge in 1789, however, cast iron was used by Telford on aqueducts such as Chirk and Pontcysyllte. Aqueducts built in the early part of the 19th century use either puddle clay or an iron trough in no particular pattern. The Almond Aqueduct uses an iron trough to achieve watertightness, as well as containing the outward pressure of the water, allowing it to be of more slender construction than a purely stone aqueduct such as the Kelvin Aqueduct.

The Almond Aqueduct, also known as the Lin's Mill Aqueduct, is a navigable aqueduct that carries the Union Canal over the River Almond in Scotland, west of Ratho, Edinburgh. HistoryThe aqueduct was built to a design by Hugh Baird, with advice from Thomas Telford, in tandem with the Slateford Aqueduct and Avon Aqueduct, with which it shares its design. Baird had originally proposed to have only a single span, with embankments carrying the canal the rest of the way, but eventually decided to use the same design as the other two aqueducts. Telford was not convinced that the stone arches were necessary in conjunction with the iron trough, but Baird used both on all three major aqueducts. Construction was carried out by Messrs. Craven, Whitaker and Nowell between 1819 and 1821, their success in building a stone bridge over the River Ouse making their tender for the contract "by far the most eligible. "DesignThe Barton Aqueduct of 1761, and subsequent canal aqueducts in the United Kingdom, used large quantities of masonry and puddling to obtain watertightness. After the success of The Iron Bridge in 1789, however, cast iron was used by Telford on aqueducts such as Chirk and Pontcysyllte. Aqueducts built in the early part of the 19th century use either puddle clay or an iron trough in no particular pattern. The Almond Aqueduct uses an iron trough to achieve watertightness, as well as containing the outward pressure of the water, allowing it to be of more slender construction than a purely stone aqueduct such as the Kelvin Aqueduct.